Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE (cont.)
REPLACING FUSE
Screw
Side Cover
Power Switch
Switch Wire
Figure 20 – Replacing Fuse
NOTE: The heater is fuse protected. If
your heater fails to ignite, DO NOT RETURN YOUR HEATER TO THE
STORE.
Please follow the simple instructions below to inspect and change
the fuse.
- Unplug heater.
- Remove side cover screws using medium Phillips screwdriver.
■
SHOCK HAZARD. To prevent presonal injury, unplug the
power cord before replacing fuse.
- Disconnect switch wires from power switch.
- Remove fuse from fuse holder (See Figure 16).
- Replace fuse with enclosed fuse.
- Replace switch wires to power switch.
- Replace side cover.
NOTE: Specified fuse rating: AC 125/8A
Fuse Holder
Fuse
WARNING
Burn hazard!
4 16
Publicité
