Publicité
Les langues disponibles
Les langues disponibles
OPERATION (cont.)
LONG-TERM STORAGE OF YOUR HEATER
FUEL TANK DRAIN
1. Remove drain plug from rear bottom side of fuel tank by
pulling plug grip downward and drain. See Figure 8.
2. Using a small amount of kerosene, swirl and rinse the
inside of the tank.
Plug Grip
Rear Bottom
Drain Plug
Side Fuel Tank
Figure 8 – Drain Plug Removal
NEVER MIX WATER WITH KEROSENE, as it will cause rust inside
the tank. Pour the kerosene out, making sure that you remove it
all.
IMPORTANT: Do not store kerosene over summer for use during
next heating season. Using old fuel may damage heater.
3. Reinstall drain plug as follows:
- Insert plug's seal head fully into drain hole so that flange is
flush
to tank's bottom. See Figure 9.
- Insert seal cap fully into head hole so that cap flange is
flush to head flange. See Figure 9.
IMPORTANT: Reinstall plug fully into hole in tank; otherwise it
will not seal completely.
Figure 9 – Drain Plug Reinstall
4 11
- Make sure storage place is free of dust and corrosive fumes.
- Store the heater in the original box with the original packing
Drain Hole
Fuel Tank
Seal Head
Head Flange
Head Flange
Head Hole
Seal Cap
Cap Flange
material and keep USER'S MANUAL with heater.
Publicité
