STERWINS ECS2-35.3 Mode D'emploi page 224

clothes, jewellery or long hair can be caught in moving parts.
3
0
7.If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related hazards.
8.Do not let familiarity gained from frequent use of tools allow
you to become complacent and ignore tool safety principles. A
careless action can cause severe injury within a fraction of a second.
Power tool use and care
1.Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better and safer
at the rate for which it was designed.
2.Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
3.Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool accidentally.
4.Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
5.Maintain power tools and accessories. Check for misalignment
or binding of moving parts, breakage of parts and any other
condition that may affect the power tool' s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6.Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
7.Use the power tool, accessories and tool bits etc. In accordance
2. SAFETY INSTRUCTIONS
223
EN