STERWINS ECS2-35.3 Mode D'emploi page 222

General Power Tool Safety Warnings
WARNING!Read all safety warnings, instructions,
3
0
illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result inelectric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term"power tool"in the warnings refers to your mains-
operated(corded)power tool or battery-operated(cordless) power tool.
Work area safety
1.Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
2.Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
Electrical safety
1.Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.Avoid body contact with earthed or grounded surfaces, such as
pipes,radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
3.Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
4.Do not abuse the cord. Never use the cord for carrying, pulling
2. SAFETY INSTRUCTIONS
221
EN