STERWINS ECS2-35.3 Mode D'emploi page 225

2. SAFETY INSTRUCTIONS
with these instructions, taking into account the working
3
0 conditions and the work to be performed. Use of the power tool
for operations different from those intended could result in a hazardous
situation.
8. Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of thetool in unexpected situations.
Service
Have your power tools serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
Chain saw safety warnings
1.Keep all parts of the body away from the saw chain when the
chain saw is operating.Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chain saws may cause entanglement of your
clothing or body with the saw chain.
2.Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the chain
saw with a reversed hand configuration increases the risk of personal
injury and should never be done.
3.Hold the chain saw by insulated gripping surfaces only,
because the saw chain may contact hidden wiring. Saw chains
contacting a «live» wire may make exposed metal parts of the chain saw
«live» and could give the operator an electric shock.
4.Wear eye protection. Further protective equipment for
hearing, head, hands, legs and feet is recommended. Adequate
EN
224