Table des Matières
Publicité
TROUBLESHOOTING
If fan fails to operate, please check the following:
1. Consult wiring diagrams (see below) to insure proper connection.
2. Check motor lead wiring, capacitor leads and incoming supply leads
to insure definite contact.
3. If possible, use a meter to test for continuity across the fan motor
leads. In order to do this, the capacitor must be disconnected (do
not test the capacitor - it will not meter continuity). If motor leads
show continuity, consult factory for a replacement capacitor.
MAINTENANCE INSTRUCTIONS
Since fan bearings are sealed and provided with an internal lubricating
material, no addition lubrication is necessary.
5
fantech
Publicité
Table des Matières
