Plus/Minus Weighing - KERN and SOHN EOB Mode D'emploi

Plus/minus
weighing
22
 For example for item weight check, production check etc.
switch-on the balance using ON/OFF button and wait for
zero display.
 Put the nominal weight on the weighing plate and tare to
zero using TARE key. Remove the nominal weight.
 Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+" and „-" (e.g. + 0.037 g).
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
 Back to weighing mode by pressing the TARE button.

EOB/EOE_L/EOE_XL/EOS-BA-e-1633