KERN and SOHN EOB Mode D'emploi page 48

Hold function
(animal weighing
function)
There is no average value calculation in the event of too much movement
(heavy display oscillation).
EOB/EOE_L/EOE_XL/EOS-BA-e-1633
The balance has an integrated animal weighing function (mean
value calculation). Using this function it is possible to weigh
domestic or small animals exactly (min. load 1% of the max.
one), although they do not stand quiet on the weighing plate.
 Put upon weighing goods and press the HOLD key. In the
display the indicator [] starts flashing. During this time the
balance takes up several measured values and displays
then the calculated mean value.
 This value remains in the display until the HOLD button is
pressed again. The indicator [] under [HOLD] goes out,
the balance returns into normal weighing mode.
 Press the HOLD button once more to repeat this function
as often as required.

21