Menu - KERN and SOHN EOB Mode D'emploi

9 Menu

Changes are only allowed on the functions
(automatic switch-off function).
 In weighing mode keep TARE button depressed for approx. 3 sec until "SETUP"
is displayed followed by "UNIT"
 Press the HOLD button as often as necessary until the required function is
displayed.
 Press the TARE button to confirm the selected function. The current setting will
be displayed. Using the HOLD  or TARE  button, select the desired
parameter. Use the HOLD button to return to the menu.
 To exit the Menu and save, press the HOLD button as often as required until
"END" is displayed and then confirm by pressing TARE. The balance returns
automatically into weighing mode.
Navigation:
Not documented
Not documented
Factory settings are marked by *.
EOB/EOE_L/EOE_XL/EOS-BA-e-1633
(weighing units) and
23