Publicité
Les langues disponibles
Les langues disponibles
Owner's manual
How can I check whether data is being transmitted?
After setting up the network, switch the power o , wait 20 seconds and then
switch on the appliance: Check that the app is showing the UI status of the
appliance.
Some settings take several seconds to appear in the app.
How can I change my Whirlpool account but keep my appliances
connected?
You can create a new account, but remember to remove your appliances from
your old account before moving them to your new one.
SOUNDS PRODUCED DURING OPERATION
Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the pan
bottoms' characteristics (for example, when the bottoms are made from
di erent layers of material or are irregular).
AFTER SALES SERVICE
To receive complete assistance, please register your product on
www.bauknecht.eu/register.
BEFORE CALLING THE AFTER-SALES SERVICE:
1.
See if you can solve the problem by yourself with the help of the
TROUBLESHOOTING suggestions.
2.
Switch the appliance o and back on again to see if the fault persists.
IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH
WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or follow
the website's instructions on www.bauknecht.eu.
When contacting our Client After sales service, always specify:
•
a brief description of the fault;
•
the type and exact model of the appliance;
Type: XXX
Mod.: XXX
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXX
Made in X
XXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Policies, standard documentation and additional product information can be found by:
•
Using QR code in your appliance;
•
Visiting our website docs.bauknecht.eu;
•
Alternatively,
contact our After-sales Service
After-sales Service, please state the codes provided on your product's identi cation plate.
01
XXXX XXX XXXXX
XX XXXX XXXXX
(See phone number in the warranty booklet). When contacting our
I changed my router – what do I need to do?
If you can keep the previous network name and password in the new router,
then you have nothing to do, the appliance will reconnect automatically.
Otherwise to reconnect the appliance to the new Wi-Fi network just press
"+" in the App home page without unclaiming the appliance and follow the
instructions of the App.
These noises may vary according to the type of cookware used and the amount
of food it contains and not the symptom of something wrong.
•
the serial number (number after the word SN on the rating plate
located under the appliance). The serial number is also indicated in the
documentation;
•
your full address;
•
your telephone number.
If any repairs are required, please contact an authorized after-sales service
(to guarantee that original spare parts will be used and repairs carried out
correctly).
In the case of ush-mounted installation, call the After Sales Service to request
assembly of screws kit 4801 211 00112.
In case of installation not over a built-in oven, you can call the After Sales
Service to buy the divider kit C00628720 (cooktop 60 and 65 cm) or C00628721
(cooktop 77 cm).
If you prefer not to buy the divider kit please ensure that a separator is installed
according to the installation instructions.
xxx xxx
Mod.
xxxx xxxx xxxx
Ind.C.
xxxx xxxx xxxx
SN:
xxxx xxxx xxxx
Prod.N.
400011726052
EN
Publicité
