Peg-Perego VIAGGIO 2-3 Notice D'emploi page 22

the height according to the
stature of the child.
IMPORTANT: after completing
the operation, try moving the
headrest to verify that it is
correctly fitted in place.
4• Viaggio2/3 is fitted with two lateral
and removable drink holders.
5• Viaggio2/3 is fitted with a
reclination system that guarantees
maximum comfort. To recline the
seat, pull the handle on the front and
simultaneously lift the seat.
Fitting the child car seat
with the safety belts and
Surefix fittings
For cars fitted with Isofix
hooks
This method can be used only if the
car is fitted with Isofix hooks.
For further information on the
availability of these hooks and their
location, refer to the instruction
manual of the car. Surefix fittings
guarantee a greater safety, but
cannot replace the function of
safety belts.
6• To stretch the Surefix hooks, press
the button on the front inside the
bag, as shown in the figure, and
stretch them manually.
7• Fix the Surefix connectors to the
Isofix hooks of the car seat, verifying
that they "click" in place (Arrow A).
Tension the belt and simultaneously
push the child car seat (Arrow B)
towards the backrest of the car seat
(Arrow C).
IMPORTANT: after completing
the operation, try moving the seat
to verify that the Isofix fittings have
been correctly hooked to the Isofix
fittings .
8• To detach the Surefix connectors
of the child car seat from the Isofix
hooks, press the button on the
front inside the bag and release
the connectors belts in order to be
able to manually detach them by
pressing the safety lever situated on
the hooks, as shown in the figure.
Fitting the child car seat
with the safety belts
For cars that are NOT
fitted with Isofix fittings
9• Place Viaggio 2/3 on the car seat
in the direction of travel, as shown
in the figure, and place the child on
the seat.
How to secure your child
on Viaggio 2/3
10• Secure your child with the car
safety belt as shown in the figure.
11• Fix the car safety belt to the
car, ensuring that it clicks in place.
Position the two sections of the belt
as shown in the figure.
12• To complete the fixing, insert the
safety belt diagonally in the upper
22