Publicité
Å
ı
1
CONTROL FUNCTIONS
1
1 - 9
EC150000
CONTROL FUNCTIONS
MAIN SWITCH (TT-R90E)
Functions of the respective switch positions
are as follows:
ON:
The engine can be started only at this
position.
OFF: All electrical circuits are switched off.
The key can be removed in this position.
"ENGINE STOP" SWITCH
TT-R90
Make sure that the engine stop switch 1 is
positioned to "
". The engine stop switch has
been equipped to ensure safety in an emer-
gency such when the machine is up set or
trouble takes place in the throttle system. The
engine will not start or run when the engine
stop switch is turned to "
TT-R90E
The engine stop switch 1 is located on the left
handlebar. Continue pushing the engine stop
switch till the engine comes to a stop.
Å TT-R90
ı TT-R90E
START SWITCH (TT-R90E)
The start switch 1 is located on the right han-
dlebar. Push this switch to crank the engine
with the starter.
SHIFT PEDAL
The gear ratios of the constant-mesh 3 speed
transmission are ideally spaced. The gears
can be shifted by using the shift pedal 1 on
the left side of the engine.
WARNING
When starting out on the machine, shift the
transmission into 1st after pulling in the front
brake lever and closing the throttle grip.
GEN
INFO
".
Publicité
