Publicité
FUSE INSPECTION (TT-R90E)
3. Replace:
Replacement steps:
Set the main switch to "OFF".
G
Install a new fuse of the correct amperage.
G
Set on the switches to verify if the electri-
G
cal circuit is operational.
If the fuse immediately blows again, check
G
the electrical circuit.
Never use a fuse with an amperage rating
other than that specified. Improvising or
using a fuse with the wrong amperage rat-
ing may cause extensive damage to the
electrical system, cause the starting and
ignition systems to malfunction and could
possibly cause a fire.
4. Install:
3 - 28
Blown fuse
G
Items
Main fuse
WARNING
Rear fender
G
Seat
G
INSP
ADJ
Amperage
Q'ty
rating
10 A
1
Publicité
