Parkside PBSD 900 A2 Traduction Des Instructions D'origine page 12

Tips and tricks
■ Never use the same abrasive belt
wood and metal.
■ Worn or cracked abrasive belts can damage
the workpiece. Therefore, be sure to replace
worn abrasive belts before starting work.
■ Always hang up the abrasive belts to store
them, as kinks etc. can make them unusable.
Maintenance and cleaning
WARNING! RISK OF INJURY!
Switch off the appliance and pull
out the power plug before starting
any work on the appliance.
The belt grinder is maintenance-free.
■ Always clean the appliance directly after
finishing work.
■ Use a dry cloth to clean the housing. Under no
circumstances should you use fuel, detergents,
solvents or abrasive cleaners.
Emptying/cleaning the dust collector
♦ Pull the dust collector
♦ Empty the dust collector
knocking out the contents and then push the
dust collector back onto the appliance.
♦ Ensure ventilation openings are always free.
♦ Remove any adhering grinding dust with a
brush.
PBSD 900 A2
to work
off the appliance.
completely by
Disposal
The product and its packaging are recyclable. They
are subject to an extended manufacturer responsi-
bility and will be collected separately.
Do not dispose of power tools
in your normal domestic waste!
The adjacent symbol of a crossed-out
dustbin means that this appliance is
subject to Directive 2012/19/EU. This directive
states that this appliance may not be disposed of in
the normal household waste at the end of its useful
life, but must be taken to specially set-up collection
locations, recycling depots or disposal companies.
The disposal is free of charge for the
user. Protect the environment and
dispose of this appliance properly.
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
The packaging materials have been
selected for their environmental friend-
liness and ease of disposal and are
therefore recyclable. Dispose of
packaging materials that are no longer needed in
accordance with applicable local regulations.
Dispose of the packaging in an envi-
ronmentally friendly manner. Note the
labelling on the packaging and sepa-
rate the packaging material compo-
nents for disposal, if necessary. The
packaging material is labelled with abbreviations
(a) and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
GB │ IE │ 9 ■