ITW Simco CMM Easy Notice D'utilisation page 39

Screw
Cap
Fig. 4, assembly External Control Kit CMM Easy
- Determine the location on the machine or the control panel where the Control Kit can be
mounted. Ensure that the Control Kit is easily accessible for staff members operating the
device.
- Drill 4 holes in the panel according to fig. 3. Remove burrs and sharp edges.
- Assemble the Control Kit behind the panel with the fitting materials provided according to
fig. 4. It is possible to wire the Control Kit before mounting it (see chapter 5.3)
- Stick the adhesive label provided onto the panel.
- Turn the shaft of the voltage divider on the print board all the way to the left.
- Set the button and cap provided onto the shaft so the indicator of the knob is set to 0%.
ExternalControlKit_CMMEasy_UM_9752098550_NL_D_GB_F_V2_0
PCB External Control Kit
Washer
Label
Knob
Spring washer
Sleeve
Nut
Machine panel
38