Installation External Control Kit With External Setpoint 0-10 V - ITW Simco CMM Easy Notice D'utilisation

5.3.2 Installation External Control Kit with External Setpoint 0-10 V

- For use with External Setpoint 0-10 V DC: connect the Control Kit according to fig. 8.
- Connecting "Cycle OK" and "Setpoint feedback" is optional.
- The 0V- connection of the power supply must be earthed. Earthing is necessary for proper
and safe operation and prevents electrical shocks when touching the device.
- Flip the setpoint switch to "Remote".
Fig. 8, wiring schedule External Control Kit Remote Setpoint 0-10 V
ExternalControlKit_CMMEasy_UM_9752098550_NL_D_GB_F_V2_0
GB
41