External Control Kit Installation - ITW Simco CMM Easy Notice D'utilisation

5.3 External Control Kit installation

Setpoint limiter 9-18 kV max.
Fig. 5, back view External Control Kit CMM Easy
- Connect the connector cable of the generator to the CMM Easy connector of the Control Kit.
See fig. 5.
- Connect the GND (ground) of the power supply to a guaranteed earth point on the device.
Fig. 6, connections CMM Easy
ExternalControlKit_CMMEasy_UM_9752098550_NL_D_GB_F_V2_0
Machine connector
Setpointschakelaar
Local/Remote
Pin Name
1 +24 V DC
2 Remote ON/OFF
3 0 V/GND
4 Cycle OK
5 SETPOINT (4-20 mA)
CMM Easy-connector
- Remote
Setpoint
- Local
Setpoint connector
Standard colour
Brown
White
Blue
Black
Yellow/Green - Grey
GB
39