5 Installation
Warning:
-
Electrical installation may only be carried out by a skilled electrical fitter
-
Disconnect the power supply before working on the equipment
-
The 0V- connection of the power supply for the Control Kit must be earthed. Earthing
is necessary for proper and safe operation and prevents electrical shocks when
touching the device.
5.1 Prior Check
-
Check whether the device has been received undamaged and in the required version.
-
Check whether the details on the packing slip correspond to the details shown on the
product received.
If you have any problems or if you are in doubt about any aspect of this device, please contact
Simco-Ion Netherlands or your regional agent.
5.2 External Control Kit assembly
Fig. 3, drill pattern machine panel
ExternalControlKit_CMMEasy_UM_9752098550_NL_D_GB_F_V2_0
Machine panel
GB
37