Installation External Control Kit With External Setpoint 0-24 V - ITW Simco CMM Easy Notice D'utilisation

5.3.3 Installation External Control Kit with External Setpoint 0-24 V

- For use with External Setpoint 0-24 V DC: connect the Control Kit according to fig. 9.
- Connecting "Cycle OK" and "Setpoint feedback" is optional.
- The 0V- connection of the power supply must be earthed. Earthing is necessary for proper
and safe operation and prevents electrical shocks when touching the device.
- Flip the Setpoint switch to "Remote".
Fig. 9, wiring schedule External Control Kit Remote Setpoint 0-24 V
ExternalControlKit_CMMEasy_UM_9752098550_NL_D_GB_F_V2_0 42