ProBreeze PB-D-23 Mode D'emploi page 13

Remove the inlet frame from the unit by gently pulling on
•
the handle at the top of the filter cover.
Remove the active carbon filter
•
holder from the inlet frame
cover.
Remove the active carbon filter
•
from the filter cover.
To extend the lifespan of both filters, use a vacuum
•
cleaner, using the brush attachment to remove dust from
the surface of the filters.
Put the filters back together (shown below) and put the
•
filter cover back.
Inlet frame
washable pre-filter
We recommend to replace your active carbon filter every 6 months. Scan the QR code to
purchase replacement filters. Follow the instructions above to remove the older carbon
filter and replace it with the new active carbon filter.
Cleaning the water tank:
Remove and empty the water tank as per the instructions
•
in the "Emptying the water tank" section.
Remove the water tank's lid by removing the handle and
•
lifting the water tank's lid upwards.
Clean the water tank with warm tap water and mild
•
detergent (e.g. washing up liquid). Note: Do not use
boiling water to clean the water tank.
Ensure to remove any scale or deposits that have formed
•
inside the water tank.
Active carbon
filter
Active carbon
filter holder
English | 13 of 105