Never insert fingers or metal objects into the vents and
•
openings of the dehumidifier.
The appliance shall be installed in accordance with
•
national wiring regulations.
The unit's circuit board(PCB) is designed with a fuse to
•
provide overcurrent protection. The specifications of the
fuse are printed on the circuit board.
SPECIFIC INFORMATION REGARDING R290 REFRIGERANT GAS
― ―
WARNING: THE APPLIANCE MUST BE INSTALLED, OPERATED
AND STORED IN A ROOM WITH A FLOOR AREA LARGER
THAN 4M
.
2
This appliance contains 0.06kg (60g) of R290 refrigerant
•
gas.
R290 is a refrigerant gas that complies with the European
•
directive on the environment.
Do not puncture any part of the refrigerant circuit.
•
Be aware R290 refrigerant is odourless and does not
•
have the odour normally associated with natural gas and
propane tanks.
Do not use means to accelerate the defrosting process
•
or to clean, other than those recommended by the
manufacturer.
The appliance must be placed in an area without any
•
continuous sources of ignition such as open flames, gas,
or electrical appliances in operation.
Do not puncture and do not burn.
•
If the appliance is installed, operated or stored in a non-
•
ventilated area, the room must be designed to prevent
CAUTION
RISK OF FIRE
English | 7 of 105