OPERATING INSTRUCTIONS
- -
CONTROL PANEL
Indicator Lights
1.
Water tank full
2.
Timer
3.
Night display
4.
Laundry mode
Power Button
Mode Button
Auto Mode
Max Mode
Continuous
Dehumidifying
Mode
Laundry Mode
Humidity
Setting
+ -
Buttons
Fan Speed
Button
Timer Button
10 of 105 | English
5.
Ventilation
6.
Auto swing
7.
Child lock
8.
Defrost
9.
Auto mode
Press this button to turn the dehumidifier on or put it on standby.
When you turn it on, the Auto mode indicator and room humidity will be
displayed.
Press this button repeatedly to select the desired dehumidifying operation
mode.
Set your target humidity using the + and - buttons and your fan speed
with the fan speed button. The unit will automatically turn off once your
target humidity level has been reached. If the room's humidity level goes
above your target humidity level the unit will turn back on.
The unit will automatically set the fan speed to high and have a
target humidity level of 30%. Once this has been reached the unit will
automatically turn off. If the room's humidity level goes above 30%
humidity the unit will turn back on.
The dehumidifier constantly operates without stopping. The fan runs at
low speed and cannot be adjusted.
The dehumidifier constantly operates to help dry clothes. The fan runs at
high speed and cannot be adjusted.
Use these buttons to adjust the desired humidity level between 30% and
80% in 5% increments. The LED light will flash while adjusting, and it will
return to normal after 5 seconds. The dehumidifier will continue to operate
until the room humidity is lower than the desired level or the water tank is
full. Note: humidity level adjustments can only be made in Auto mode.
Press this button to set the fan speed to high or low. The corresponding
fan speed indicator will be displayed. Fan speed adjustments are only
available in Auto and Ventilation modes.
Press the timer " " button to set a turn-on or turn-off timer, between 1- 24
hours.
10.
Continuous
dehumidification
11.
Max mode
12.
Low wind
13.
High wind