EIBENSTOCK EBM 250/ 2 RP Notice Originale page 96

Technical Characteristics
Diamond Drill Rigs BST 250, BST 300
Measures:
BST 250:
BST 300
Length of the column:
Weight
BST 250:
BST 300:
Max. drilling diameter
BST 250:
BST 300:
Inclination:
Carriage brake:
Locking in top position:
Fixture of the motor:
Adaptation to surface:
Available special accessories:
Fastening set (concrete)
Fastening set (brickwork)
Spare dowel
Rawl – dowel
Quick action bracing unit
Diamond drill rig with turnstile, Allen wrench SW 6 and SW 8,
4 Allen screws M 8 x 20 and operating instructions in a cardboard box.
Application for Indented Purpose
The diamond drill rig is made for diamond core drills which are fixed by means of a
mounting plate. The max. drilling diameter must not exceed the drilling diameter
indicated in the chart.
When drilling overhead, a water collecting device must be used.
In case of wrong handling or misuse, the producer does not assume any liability.
Item
Supply
430 x 330 x 1040 mm
540 x 330 x 1100 mm
995 mm
15.5 kg
18.5 kg
250 mm
350 mm
0° - 45°
yes
yes
quick change motor plate
4 positioning screws / 2 bubble
levels
12
Order no.
35720
35724
35722
35725
35730