EIBENSTOCK EBM 250/ 2 RP Notice Originale page 29

Warranty
According to the general supply conditions for business dealings,
suppliers have to provide to companies a warranty period of 12 months for
redhibitory defects (to be documented by invoice or delivery note).
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-
dismantled condition to the manufacturer.
Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or
standardization documents:
EN 61 029, EN 55 014, EN 61 000
according to the provisions of the directives 2011/65/EU, 2004/108/EG,
2006/42/EG
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig Frank Markert
General Manager Head of Engineering
15.04.2014
29