Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
pOSSIBLE pROBLEM
EASY SOLUTION
•
Check that the power plug is securely inserted
into the outlet
Oven will not switch
•
Insert the power plug into an independent outlet
"ON"
•
Insert the power plug into a different outlet
•
Reset the circuit breaker if necessary
•
The oven will remember the last setting used for
each function unless you remove the plug from
I would like to have
the wall outlet.
the oven LCD default
•
To restore the oven's default settings for each
settings back
function, remove the plug from the wall outlet.
Wait 5 seconds, then plug back in.
•
The oven goes into STANDBY mode if not used
for 10 minutes. When in STANDBY mode, the
LCD screen will cease to illuminate, however
'STANDBY' will still be visible.
The LCD display light
has gone out
•
To re-activate the oven out of STANDBY mode,
press the START/CANCEL button on the control
panel, or turn any dial. The LCD screen will
re-illuminate.
•
Some large pizzas may brown unevenly in com-
The pizza does not
pact ovens. Open the oven door half way through
cook evenly
the cooking time and turn the pizza 90 degrees
for more even browning.
•
The FROZEN FOODS button is only selectable
I cannot select the
during the TOAST, BAGEL, BAKE, PIZZA and
FROZEN FOODS button
COOKIE functions.
46
TROUBLESHOOTING
pOSSIBLE pROBLEM
EASY SOLUTION
Steam is coming out
•
This is normal. The door is vented to release
from the top of the
steam created from high-moisture content foods
oven door
such as frozen breads.
•
This is normal. The condensation created from
Water is dripping onto
high moisture content foods such as frozen
benchtop from under
breads will run down the inside of the door and
door
can drip onto the bench.
•
Element IQ™ accurately controls the heat inside
The heating elements
the oven by pulsing the power in the heating
appear to be pulsing
elements in short bursts. This is normal.
47
Publicité
