Publicité
Les langues disponibles
Les langues disponibles
OpERATING YOUR BREVILLE SMART OVEN™ — REHEAT
NOTE:
When using metal foil to cover
accessories, pans, and dishes, it is
recommended that the wire rack be
in the middle or bottom location.
NOTE:
Caution should be exercised when
using pans and dishes constructed
of materials other than metal. If
using ceramic or glass pans or
dishes it is important that they are
oven safe to prevent cracking.
NOTE:
Caution should be exercised when
using lids in the oven, as pressure
build up in a covered pan or dish
may cause hot ingredients to expel
or the dish to crack.
3.
Close the oven door.
4.
Turn the FUNCTION dial until the
indicator reaches the REHEAT function.
The LCD screen indicates the preset
temperature of '330°F'.
38
5.
The reheating temperature and time
can be adjusted before or during the
reheating cycle.
a) The preset reheating temperature of
330˚F is displayed as the default on
the LCD screen. Turn the TEMP/TIME
dial to adjust the cooking temperature
in 10°F increments, from 120°F to a
maximum of 450°F (or in the Celsius
mode, 5°C increments, from 50°C to
a maximum 230°C).
b) To select the reheating time, press
the center of the TEMP/TIME dial until
the LCD screen displays the preset
reheating time of ':15 MINS'.
Turn the dial to adjust the cooking
time in one minute increments up to
a maximum of 1 hour.
NOTE:
Your customized REHEAT
temperature and time settings will
remain in the memory of the oven
until you change them or unplug
the oven from the wall outlet. When
the oven is plugged back into the
wall outlet, the REHEAT function will
automatically return to the preset
temperature of '325°F', preset time
of ':15 MINS'.
OpERATING YOUR BREVILLE SMART OVEN™ — REHEAT
6.
Press the START/CANCEL button
to activate this setting. The button
surround will illuminate red, the oven
alert will sound, and the LCD screen
will illuminate orange.
7.
The timer will be displayed and begin to
count down in one minute increments.
The temperature and time can be
adjusted during the reheating cycle by
turning the corresponding
TEMP/TIME dial.
8.
At the end of the reheating cycle,
!
the oven alert will sound three times,
the START/CANCEL button will
cease to illuminate and the LCD back
light will illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OpERATION. ALWAYS
USE pROTECTIVE HOT pADS
OR INSULATED OVEN MITTS WHEN
INSERTING, REMOVING OR HAN-
DLING ITEMS FROM
THE OVEN.
9.
The reheating cycle can be
stopped at any time by pressing the
START/CANCEL button. This will
cancel the cycle. The button surround
illumination will go out and the LCD
screen will illuminate blue.
39
Publicité
