Publicité
Les langues disponibles
Les langues disponibles
CARE & CLEANING
your Breville Compact Smart Oven™
42
CARE & CLEANING YOUR BREVILLE COMpACT SMART OVEN™
Ensure the oven is turned OFF by pressing
the START/CANCEL button on the control
panel. The oven is OFF when the button
surround illumination is no longer red.
Remove the power plug from the wall
outlet. Allow the oven and all accessories
to cool completely before disassembling
and cleaning.
NOTE:
Do not use abrasive cleansers,
metal scouring pads or metal
utensils on any of the interior or
exterior surfaces of the oven,
including the crumb tray.
Do not use abrasive cleansers,
metal scouring pads or metal
utensils to clean any of the
accessories as they may damage
the porcelain enamel finish of the
baking pan and broiling rack.
Cleaning the outer body and door
1.
Wipe the outer body with a soft, damp
sponge. A non-abrasive liquid cleanser or
mild spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the oven surface, before
cleaning.
2.
To clean the glass door, use a glass
cleaner or mild detergent and a soft,
damp sponge or soft plastic scouring
pad. Do not use an abrasive cleanser or
metal scouring pad as these will scratch
the oven surface.
3.
Let all surfaces dry thoroughly prior to
inserting the power plug into a wall outlet
and turning the oven ON.
DO NOT IMMERSE THE BODY,
!
pOWER CORD OR pOWER pLUG
IN WATER OR ANY OTHER
LIQUID AS THIS MAY CAUSE
ELECTROCUTION
Cleaning the interior
1.
The walls on the inside of the oven
feature a non-stick coating for easy
cleaning. To clean any spattering that
may occur while cooking, wipe the
walls with a soft, damp sponge.
A non-abrasive liquid cleanser or mild
spray solution may be used to avoid
build-up of stains. Apply the cleanser to
the sponge, not the oven surface, before
cleaning. Avoid touching the quartz
heating elements.
USE EXTREME CAUTION WHEN
!
CLEANING THE QUARTZ
HEATING ELEMENTS. ALLOW
THE OVEN TO COOL
COMpLETELY, THEN GENTLY
RUB A SOFT, DAMp SpONGE OR
CLOTH ALONG THE LENGTH OF
THE HEATING ELEMENT. DO NOT
USE ANY TYpE OF CLEANSER
OR CLEANING AGENT. LET ALL
SURFACES DRY THOROUGHLY
pRIOR TO INSERTING THE
pOWER pLUG INTO A WALL
OUTLET AND TURNING THE
OVEN ON.
2.
Let all surfaces dry thoroughly prior to
inserting the power plug into a wall outlet
and turning the oven ON.
43
Publicité
