Publicité
Les langues disponibles
Les langues disponibles
Regular monitoring of your appliance and reporting any faults to your retailer will ensure that your
wine cabinet provides you with years of faithful service.
Humidity
Your cabinet is fitted with an exclusive EuroCave system allowing you to recreate inside your wine
cabinet the level of humidity required for effective sealing of your bottles' corks. When installing
your cabinet, it is important to pour the equivalent of one glass of water on the floor of the cabinet,
to activate the heat pump.
When starting up
The compressor does not work: ensure that the wall socket is supplied with power by plugging in another electrical
•
appliance.
The compressor never stops: put your hand on the condenser (grill located on the outer rear wall of the appliance); if the
•
condenser is cold, contact your retailer. If the condenser is hot, set the temperature of your cabinet to I8°C, the maximum
value in the temperature setting range. If the compressor still does not stop, contact your retailer.
N.B. Only prolonged exposure to temperatures outside
the permitted range and sudden temperature fluctuations
are harmful to your fine wines.
If the power cable is damaged, it must be replaced by the manufacturer, its customer service
department or similarly qualified persons, for safety reasons.
Whatever the circumstances, if your appliance does not seem to be operating correctly, contact your
EuroCave Professional retailer.
Alarms
Two types of alarm can appear on the setting display:
- HI indicates that the temperature inside the cabinet is too high and LO indicates that the temperature is too low.
Both alarms mean that the cabinet is malfunctioning and you should contact your after-sales service.
- The alarm signal automatically disappears once the temperature returns to normal.
Cave 1 température (3181V)
The recommended temperature setting range for storing wine is 10°C - 14°C. The default setting is 12 °C (ideal maturing
temperature).
Your wine cabinet can be placed in a room with a temperature of 32°F/0°C - 86°F/30°C.
When commissioning your cabinet, or after significant changes to the temperature setting, it can take several hours for your
wine cabinet to stabilize and display the new desired temperature. Wait a few days. If the temperature does not stabilize, contact
your retailer.
Any work carried out by technical services not approved by EuroCave Professional could invalidate the
guarantee.
9 - OPERATING FAULTS
N.B.: Any work on the cooling unit must be carried out by a
refrigerationist who must perform a leak test on the circuit
before powering up again. In the same way, any work on
the electrical system must be carried out by a qualified
electrician.
EN
-12-
Publicité
