Publicité
Les langues disponibles
Les langues disponibles
Il - Configuration of a shelf in display version:
To store bottles on a display shelf, proceed as follows:
- Insert the shelf in the desired location.
- Place a wooden locking pin in each of the 2 holes located approximately 15 cm from the front of the shelf, on the right and
left of the upper side: these pins fix the shelf with respect to the thermoformed wall and prevent any inappropriate movement
of the shelf (see diagram).
- Start by laying the bottles in each recess of the back row, base of the bottle towards the back (6 "traditional" Bordeaux
bottles).
- Continue filling the shelf by stacking the bottles on the back row (7+6+7+6 = 26 "traditional" Bordeaux bottles), taking care
not to allow any bottles to touch the rear wall.
- To display your bottles, stand them up at the front of the shelf (maximum capacity: 6 "traditional" Bordeaux bottles).
- In display version, the shelf has a maximum capacity of 32 "traditional" Bordeaux bottles.
III – Configuration of a shelf in sliding version:
To store bottles on a sliding shelf, proceed as follows:
- Insert the shelf in the desired location.
- Place a wooden locking pin in each of the 2 holes located 4 cm from the rear of the shelf, on the right and left of the upper
side: when you pull the shelf out, these pins prevent the shelf from coming all the way out of the cabinet (see diagram).
- Pull the shelves in the stop position towards you.
- Start by laying the bottles in each recess of the back row, bottle base towards the back.
- Continue with the front row, placing the bottles in the opposite direction.
- A sliding shelf can only hold one row of bottles (maximum I3 "traditional" Bordeaux bottles).
- In the case of a mixed shelf layout, for optimal accessibility, we recommend that you place the sliding shelves in the central
section of the appliance.
Never pull more than one loaded sliding shelf out at a time.
Please note that if you do not have enough bottles to fill the wine cabinet, it is preferable to distribute the load over all the
shelves available, in order to not have bottles "all at the top" or "all at the bottom". For optimal performance, we recommend
that you use the cabinet at over 75% of its capacity. Change the position of the locking pins if changing from sliding shelf to
storage or display shelf. The shelves are fitted with holders for labels (card to be cut out, supplied with your cabinet) allowing
you to see, in just once glance, which bottle to take.
EN
-8-
Publicité
