6 - Electronic option
SETTING TEMPERATURE ON VIEILLITHEQUE MODELS (1 temperature)
Your wine cabinet's temperatures are entirely controlled from the control panel, which is shown below:
1
1 Press the right button "SET
" for approximately 2 seconds. The word "SET" then appears on the display.
2 Press the SET button once again rapidly. The current set temperature will then be displayed (a little green light top left hand corner flashes)
3 When this light is flashing, you then have 10 seconds to modify the setting by pressing the
back to the measure reading.
Recommended setting range: 10 to 14°C (50° to 57°F)
4 Once you have finished the setting, wait approximately 10 seconds, the display will automatically revert to the actual temperature within the cabinet and the
small light will go out.
The temperature is pre-set at 12¡C (54¡F) (ideal preservation temperature). One can however modify the setting between 9 and 15¡C (48¡ and 59¡F).
Beyond these two limits, the
and
When changing the temperature settings significantly, several hours may be necessary for your wine cabinet to stabilise and display the desired temperatures.
Temperature setting buttons
2
buttons will not function.
cabinet temperature
Hot and cold circuit "on"
indicators (red and green)
3
4
and
buttons, otherwise, the reading will automatically go
- 11 -
TEST button
On / Off switch
The value indicated by the
regulator without touching
anything IS ALWAYS THE
ACTUAL TEMPERATURE
WITHIN THE CABINET