Eurocave D164 Utilisation page 15

RECOMMENDATIONS FOR LAYOUT AND STORAGE YOUR WINE CABINET
Your EuroCave cabinet was designed to store a maximum number of bottles in total security. We recommend that you observe the tips below to optimize
loading.
- Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in one point. Also make sure your bottles do not touch
the back of the cabinet, or the step at bottom.
- Also make sure that bottles are not all grouped together at the top or bottom of the cabinet.
- Observe the loading instructions provided in section 7, according to the type of storage fixtures with which your cabinet is equipped, and never stack bottles
on a sliding shelf.
- If your cabinet has sliding shelves, they should be installed toward the top of the cabinet to facilitate everyday access.
- Also place one or two bottles of each of your wines on the sliding shelves and keep your reserve bottles on the storage shelves. Then simply replace bottles
when necessary.
- Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Never change the position of your cabinet's brace(s)
(see diagram on page 2-3) without first consulting your dealer,
and never move this part while your cabinet is loaded.
Before modifying your cabinet's original configuration in any way,
be sure to ask your dealer for advice.
- 15 -