Publicité
Les langues disponibles
Les langues disponibles
7 - C
IV - Temperature setting
Setting the temperature of your wine cabinet can only be carried out inside the wine cabinet.
Temperature
display
To adjust the temperature of your cabinet:
• Press and hold down the
• Set the desired temperature by pressing the
• Confirm your programming by pressing and holding down the "P" button for a few seconds.
Your programming will be automatically confirmed if no button is pressed within the 15 seconds following programming.
The recommended control range for preserving and maturing your wine is from 48°F to
59°F, the default setting is 54°F.
To operate correctly, your cabinet should be located in a room with a temperature
between 32°F and 95°F.
When there has been a significant modification in set temperatures, it can take several hours for your wine cabinet to stabilise and display the desired
temperature.
- You have loaded your cabinet with a large number of bottles: it takes several hours for your cabinet to reach the right temperature.This could happen when
first starting up the cabinet, this is not due to an operating fault.
If, however, after a few days, the problem persists, contact your EuroCave (or Around Wine) dealer.
N.B: Only prolonged exposure to excessive temperatures or violent fluctuations in temperature will harm your fine 'crus'.
O M M I S S I O N I N G YO U R W I N E CA B I N E T
On/Off button
Confirmation button
button for a few seconds.The symbol "SPI" will appear alternatively with the previous temperature setting.
and
Adjustment buttons
buttons.
• Temperature display: Displays the current temperature
inside your wine cabinet.
• Adjustment buttons (
/
temperature inside the cabinet.
• Confirmation button "P": confirm the setting temperature.
• On/off button: "U" switches the wine cabinet on and off.
) sets the desired
Publicité
