Options And Accessories; Technical Specifications; Ambient Conditions - PLYMOVENT ControlPro Manuel D'installation

Fan control equipment
Preferred way:
- Plymovent VFD/Panel
4
(frequency inverter)
Other options:
- Other type of frequency
inverter (third party)
- Star-delta switch
- Other type of motor
starter
4
1.3.2 SHIELD fire safety solutions
To enhance fire safety of the entire filter/extraction system,
you can connect the following components to the Panel:
- ShieldControl | Fire detection panel
- Sliding valves | Pneumatic shut-off sliding valves in the
extraction duct that close automatically in case of fire
- 3/2 solenoid valve | Release valve
1.4

Options and accessories

The following products can be obtained as an option and/or
accessory:
- Panel  HMI cable 60 m/197 ft (instead of standard length
15 or 30 m)
- LightTower
- PT-1000 or PT-2500 | External pressure sensor
- Dustbin level indication
6
1.5

Technical specifications

1.5.1 ControlPro/Panel
Dimensions refer to Fig. I on page 82
Weight 11 kg (24 lbs.)
Material of housing sheet metal
Protection class IP 65
Input voltage 100-240 VAC, 50-60Hz
Internal operating 24 VDC
voltage
Power consumption max. 60 W
Inputs 8x digital input (10 mA wetting current)
3x analogue input (4-20 mA)
Outputs 2x output relay (max. 30 VDC, 2,5 A)
2x output "low-side switch" (24 VDC, 2,5 A)
1x output "low-side switch" (24 VDC, 250
mA)
4x output "low-side switch" (24 VDC, 30 mA)
1x analogue output (4-20 mA)
4. Full integration of communication between the HMI and the Plymovent VFD/
Panel (frequency inverter) through an RS-485 cable. Including main switch to
de-energize the entire filter system, thus complying with CE safety
requirements.
5. Only in combination with the MDB; not suitable for the SCS / EDS.
SHIELD is a safety system that consists of components for fire prevention,
detection and suppression.
6. Future development
0000112606/200917/0 ControlPro
to have access to the extensive
feature package of ControlPro;
specific type depends on the
selected extraction fan
fan start/stop with optional
alarm feedback only; optional
connection to internal fan
pressure sensor
fan start/stop with optional
alarm feedback only
e.g. Direct online (DOL)
5
(switch or sensor)
Internal connectors 2x CAN + power (ControlPro/HMI & Control/
SlaveBoard)
1x RS-485 (Modbus) to frequency inverter
(19200,8N1)
1x USB 2.0 (host only, USB A receptacle)
1x ethernet (for service purposes)
1x RS-232 (for service purposes)
Internal pressure 2x integrated pressure sensor
sensors
Working range: 0-4000 Pa (0-16 in. WG)
Guidelines & EMC 2014/30 EU
standards
EN 61000-6-2
EN 61000-6-4
Approvals & CE
certificates
cULus (UL 508A)
1.5.2 ControlPro/HMI
Dimensions 255 x 165 x 125 mm (10.0 x 6.5 x 4.9 in.)
Weight 900 g (2 lbs.)
Material of housing PC/ABS
- flammability - UL94 V-0
standard
Operating voltage 24 VDC (+/- 15%)
Power consumption - display off: nom. 4 W
- display on: max. 5 W
External connectors - CAN + power (connection to Panel)
[M12-5p shielded connector]
- USB 2.0 (host only)
[USB A receptacle, with dust cap]
- ethernet 10/100 Mbit/s
[RJ45, shielded, with dust cap]
Display:
- size - 7"
- type - resistive touch screen
- brightness - 300 cd/m²
- colour - 262K
- resolution - 800 x 480 pixels
Guidelines & EMC 2014/30 EU
standards
EN 61000-6-2
EN 61000-6-4
Approvals & CE
certificates
1.5.3 Control/SlaveBoard
Operating voltage 24 VDC (+/- 15%)
Current max. 2,5 A
Internal connectors 2x CAN + power (max. 24 VDC, 2,5A)
Guidelines & EMC 2014/30 EU
standards
EN 61000-6-2
EN 61000-6-4
Approvals & CE
certificates
1.6

ambient conditions

1.6.1 ControlPro/Panel
Ambient temperature:
- min.
- nom.
- max.
Max. relative humidity
Suitable for outdoor use
LVD 2014/35 EU
IEC 60204-1
IEC 61131-2
IEC 61439-1
LVD 2014/35 EU
IEC 60204-1
LVD 2014/35 EU
IEC 60204-1
Pressure sensors:
internal external
0°C (32°F) -4°C (41°F)
+20°C (68°F) +20°C (68°F)
+50°C (122°F) +50°C (158°F)
80%
yes
EN - 4