Urmet BiBus II ED K-STEEL 1072/14 Mode D'emploi page 24

The following message will appear on the display:
Modify Data
Search by Pos.
Modify Data
Search by Name
Press the scroll arrows to select the search criteria
and press to confirm.
Search by position
This sub-menu can be used either to edit the user
code, name or door opener code in a certain position
in the table or to delete the record. The following
message will appear on the display:
Position:
Code:
Press the scroll arrows to select the position to be
edited and press
can:
• delete the record by pressing
the keyboard 1032/65 to delete the code). A
confirmation prompt will appear and the record
will be deleted.
• change the user code: enter a new code and
press to confirm and go to the next name to be
edited.
• change the name: a form similar to that for
entering names will appear to edit the user code.
Edit the name and press
operation.
• change the user door opener code: a form similar
to that for entering door opener codes will appear
after editing the name. Edit the code and press
to confirm the operation.
Search by name
This sub-menu can be used to edit a name or door
opener code associated to a record.
The following message will appear on the display:
Rossi Mario
Code:
Press the scroll arrows to select the position to be
edited and press to confirm. At this point, you can:
• change the name: edit the name and press
confirm.
24
1
1001
to confirm. At this point, you
(or bs on
to confirm the
1001
• change the user door opener code: a form similar
to that for entering door opener codes will appear
after editing the name. Edit the code and press
to confirm the operation.
↓
Clear all
This sub-menu can be used to clear the name
table with respective user codes and personal door
opener code.
↑
The following message will appear on the display:
Are you sure?
Press the scroll arrows to select and press
confirm.
Association
The door phone programming sequence consists of
two steps:
A. Door phone booking (to be made on a calling
station)
B. Door phone programming (to be made in the
apartments).
A: Door phone booking.
Select the Association menu.
The following message will appear on the display:
Position:
C:1001
1 Scroll the record list with the scroll arrows. Press
to confirm the records to be added to the
booking list. Symbol
position. Press
from the booking list. Symbol
2 The door phones can be programmed in the
same order after creating the booking list. Press
. The following will appear on the display:
Proceed by programming the door phones.
B: Door phone programming.
1 Go to the first booked user, hold the button
pressed and lift the door phone handset. Two
confirmation beeps will be heard and the LED will
flash to indicate that it has been programmed.
2 Go to the other booked users and repeat the
to
operations.
<YES> <NO>
Associate?
will appear next to the
instead of
MODULE BEING
PROGRAMMED
to
1
to delete a record
will disappear.
DS1072-018A