Urmet BiBus II ED K-STEEL 1072/14 Mode D'emploi page 21

The main menu will appear on the display when
programming mode is accessed:
Main Menu
Edition
Main Menu
Language
Main Menu
C.Module Type
Main Menu
Cal Module n°
Main Menu
BUSY TIME
Main Menu
Door op. time
Main Menu
Lock rel. codes
Main Menu
Type of code
Main Menu
Codes/Names
Main Menu
Association
Main Menu
Mod. Password
DS1072-018A
Main Menu
Switchb. call
↓
Press
confirm once the required menu is reached.
Note: The module will check for other devices
programmed with the same number (ID) in
↓↑
the system when accessing programming
mode and during programming. The following
error message will appear if other modules
with the same ID are fitted (which will certainly
be the case of a system with more than one
↓↑
call station):
↓↑
Edition
The module can be configured as 1st edition or 2nd
edition device. The module must be programmed
↓↑
as 1st edition if there is even only one 1st edition
device in the system (when replacing parts in
old systems). The device must be programmed
as 2nd edition when all the devices in the system
are 2nd edition.
The following message will appear on the display:
↓↑
↓↑
Press
The system will automatically go back to the main
menu after a confirmation tone.
↓↑
Language
The following message will appear on the display:
==
↓↑
Italiano
Press
The system will automatically go back to the main
↓↑
menu after a confirmation tone.
Station type
The module can be configured as a main station or
as a secondary station. A secondary module can be
↓↑
used to send calls to internal stations in the riser but
cannot be used to call the switchboard.
and to scroll the menu. Press
EXISTING
CALL MODULE N°
Edition: II ED
<I ED> <II ED>
and to select and press
Language
and to select and press
↑
to
to confirm.
==
↓
to confirm.
21