probst FXAH-120-GREENLINE Instructions D'emploi page 32

Maintenance and care
5 Maintenance and care
5.1 Suction plate
•
Clean the suction plate from adhering objects, dirt and dust at least once a day. Clean sponge rubber with
compressed air and/or water jet.
•
Replace damaged suction plate (cracks, holes, ripples) immediately.
•
Use cold cleaner to clean the device (do not use petroleum ether or corrosive liquids).
5.2 Leak test
•
Check the unit for leaks before each use.
5.3 Annual audit
•
Check all components, especially the seal. Inspection for cracks, wear, corrosion, and functional reliability
by an expert.
5.4 Hints to the type plate
Type, serial-number, and production year are very important for the identification of your device. If you
need information to spare-parts, warranty or other specific details please refer to this information´s.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be handled with
the device. Do not exceed this carrying capacity/working load limit (WLL).
If you use the device in combination with other lifting equipment (Crane, chain hoist, forklift truck,
excavator) consider the deadweight of the device.
Example:
5.5 Hints to the renting/leasing of PROBST devices
With every renting/leasing of PROBST devices the original operating instructions must be included
unconditionally (in deviation of the user´s country's language, the respective translations of the original
operating instructions must be delivered additionally)!
58500009/58500010/58500011
14 / 14
V3 GB