Publicité
Les langues disponibles
Les langues disponibles
UNPACKING THE DEVICE
-
Carefully remove the appliance from its packing Keep the cardboard box and all packing
material until the appliance has been completely checked and tested.
-
Carefully read all information contained in this manual prior to installing and using the
appliance.
Operations other than the ones indicated in this manual may cause damages (including
serious ones) to people, animals and/or property, in addition to causing the appliance
warranty to be forfeited and relieving the manufacturing company from any and all
responsibility.
-
The instruction manual is considered integral part of the appliance, hence it must be kept
for future reference.
-
Remove all protective film packing material and any accessories from the appliance prior to
plugging it into the mains.
Store any accessories in a suitable place.
POSITIONING THE DEVICE
-
The place of installation must be indoors and well ventilated.
The oven is not suited for outdoor installation.
-
The ambient temperature of the place of installation of the appliance must be at least +4° C.
-
Make sure the installation surface (table) is suited to withstand the weight of the appliance
(also consider the additional weight when the oven is completely full).
-
Make sure that the place intended for the oven installation is such as to allow the oven door
to be opened all the way, for the purpose of working safely.
-
The installation surface of the appliance must be made of fireproof material.
-
The appliance must be positioned on top of a flat surface.
Check the flatness of the appliance once it is positioned, using the special measuring
instruments.
The appliance is equipped with adjustable feet: in case the support surface is not flat, they
can be unscrewed or screwed to adjust the oven height.
-
It is advisable to position the appliance in such a way as to make it easy to carry out any
maintenance and/or cleaning on the appliance itself.
-
Do not obstruct or reduce the air flow rate of the natural ventilation openings
provided on the oven.
These openings have been especially provided to allow cooling of the electrical
components of the oven.
Failure to comply with this instruction may cause the internal oven components to break.
Failure to comply with this instruction shall cause the warranty on the appliance to
be forfeited and shall relieve the manufacturing company from any and all
responsibility.
-
In case maintenance and/or cleaning operations require the appliance to be moved, at the
end of such operations be especially careful to correctly reposition the appliance, according
to the criteria provided above.
Publicité
