Publicité
Les langues disponibles
Les langues disponibles
PROGRAMMED COOKING
The oven can store up to 99 recipes, each one of which can be programmed with 3 phases (1,2,3).
A cooking phase with infinite time cannot be followed by another phase.
To create a new cooking program, with the oven ON, press
: the lower display will show a
flashing "P01".
Use button
or
to choose the desired program.
The caption "P01" will flash in case the program is free, otherwise it will light up steady. Press
to confirm the desired program and to start creating it.
Now the oven positions itself on the first phase (LED lit up on phase no. 1), and it is possible to set
the temperature, time and steam values (see previous paragraphs) needed for the first cooking
phase. To move on to the second cooking phase, press the button
(LED lit up on phase no.
2). It is now possible to adjust the time, temperature and steam of phase 2 and move on to phase
3.
To save a program with 3 phases, after having set them press the button
and then keep
button
pressed until the adjacent LED starts to flash.
In case you only use 1 or 2 phases, enter "0" in the time field for the phase not being used and
then save.
Once the program has been saved, you can press
to activate the cooking process: the oven
will start to pre-heat and after the "beep", it will be time to load the food to be cooked.
You can modify program data whilst cooking is in progress in order to adapt the cooking product
needs.
Changes made during the cooking phase are valid only for the cooking underway.
The LED that is lit up indicates in which cooking phase the oven is operating at that moment.
By keeping
pressed during the cooking with a program with multiple phases, continue to the
next phase before the time expires.
DELETING A PROGRAM
To delete a program from the list of programs, you need to press and keep pressed keys
and
. The program displayed will be deleted and the program becomes empty.
DELETING A PHASE
Similar to deleting a program when a phase is being changed (except the first), press
and
keep them pressed for some time to delete the current phase and those following it.
RETURN TO MANUAL COOKING MODE
To go back to the manual cooking mode, exit the program mode and press
until the temperature
value appears on the upper display.
POWER FAILURE
In case of a power failure during the cooking cycle, the oven goes into the OFF position.
Publicité
