Publicité
Les langues disponibles
Les langues disponibles
START/STOP
Press the button
to start/stop a program previously set or the cooking program underway.
ENCODER
The encoder knob turns both clockwise and counter clockwise to allow you to increase or decrease
the value shown on the display-
Remember to press the encoder to confirm the selected value, otherwise the system will not
acknowledge the command.
CORE PROBE
To set a cooking using the core probe, insert the probe in the lower part of the control panel,
removing the protective cap first.
Press the button
and set the core temperature value by means of the encoder knob.
Press the encoder knob to confirm the set value.
After having set the value relative the core temperature, press the key
and set the
temperature value in the cooking chamber, by means of the encoder knob.
Press the encoder knob to confirm the set value.
The oven will cook the food at the set temperature in the cooking chamber and, subsequently, will
turn off automatically when the probe inserted in the food records the set food temperature (core
temperature).
The core temperature can be set from a minimum of 86°F (30°C) up to a maximum of 221°F
(105°C).
DELTA T COOKING
To carry out a cooking in Delta T mode, insert the probe in the lower part of the control panel,
removing the protective cap first.
Press button
: the signalling LED will flash next to the symbol
and it will be possible to
set the desired core temperature value, by using the encoder knob.
To confirm the entered value, press the encoder knob: the signalling LED will flash next to the
symbol
At this point you can set the value of the Delta T temperature by means of the
encoder knob.
Press the encoder knob to confirm the set value.
Cooking will end when the oven, cooking at a chamber temperature equal to "actual core
temperature (inside the food) + set Delta T temperature", will reach the set core temperature.
The Delta T temperature can be set from a minimum of 0°F up to a maximum of 126°F.
CHIMNEY OUTLET ADJUSTMENT
Press the chimney button to open or close the motorised chimney of the oven.
Chimney light on = chimney open
Chimney light off = chimney closed
Publicité
