Axis AX-CL06M Manuel D'instructions page 20

STEAM/MOISTURE ADJUSTMENT
Press the key
encoder knob to confirm the set value.
You can set a value included between 0 and 10. The table below indicates the corresponding
percentage:
Value
0
1
2
3
4
5
STEAM SELECTOR
During the cooking, press button
pressed to continue adding steam.
COOKING PROGRAMS
1) Using a recipe already stored in memory: if you wish to use a cooking program that has
previously saved, press
desired program number.
Press the encoder knob to confirm the choice of the selected program.
Press key
2) New cooking program: if you wish to save the new program
Press button
the same knob to confirm.
Press button
phase (temperature, timer, steam, etc.).
While this data is being entered, the LED will be on next to the first phase During the
entering, (C1).
At the end of the settings for the first phase, press button
phase 2.
You can enter all information regarding the second cooking phase (temperature, timer,
steam, etc.).
During the entering of data pertaining to phase 2, the LED light will be on next to the second
phase, (C2).
At the end of the settings for the second phase, press button
of phase 3.
You can enter all information regarding the third cooking phase (temperature, timer, steam,
etc.).
During the entering of data pertaining to phase 3, the LED light will be on next to the second
phase, (C3).
and set the desired steam percentage by means of the encoder knob. Press the
Steam percentage
0%
10%
20%
30%
40%
50%
and, by means of the encoder knob, you can select the
to start the oven.
and, using the encoder knob, reach the first flashing number, then press
: you can now start to enter all information regarding the first cooking
Value
6
7
8
9
10
to manually add steam to the cooking chamber. Keep it
Steam percentage
60%
70%
80%
90%
100%
to move on to the setting of
to move on to the setting