Blaupunkt 5B90S8990 Notice D'utilisation page 49

Water tank
Cleaning the water tank
1. Press on the water tank
and remove it.
Steam cleaning function
This function uses steam to soften deposits inside the cooking chamber, making it easier to clean
the cooking chamber.
1. Switch on the system. Press on the water tank and remove it. Pour 1000 ml of fresh water into
the water tank.
2. Push the water tank back in.
3. In standby mode, tap the "A" button several times until the display shows "A11". This means
that the appliance has switched on the steam cleaning function. The time display will show the
standard time of 05:00 min.
4. Press to start the program.
Notes
The duration of steam cleaning cannot be set. Press the pause button or open the door to interrupt
the cleaning process. Close the door and press the start button to restart the cleaning process.
Automatic deposit removal function
For best cleaning results, we recommend the use of sodium citrate. Follow the manufacturer's
instructions on the packaging. If the steam function has been running for 20 hours, the descaling
function should be switched on afterwards.
1. Switch on the system. Remove the water tank and add 1000 ml of fresh water and a pack of
descaling agent.
2. Push the water tank back in.
2. Remove the cover and clean the water
tank.
3.
Replace the cover and lids. Press on the
points shown in blue in the illustration.
Take care that nothing gets jammed.
12