Publicité
Les langues disponibles
Les langues disponibles
ULTRAFLEX
1 PRODUCT DESCRIPTION
1.1 Product description and recommended use
The single lever control must be assembled on the side of the control
console of the boat. The lever is provided with adjustable clutch,
warm-up gas button device with shift gear in neutral position (not
present on model with electric motors) and switch button to adjust
the trim.
The B110-ETC single control lever is also equipped with a standard
kit to use the lever with the following ULTRAFLEX cables:
- C2 - C8 - MACHZero (type 33C cables);
If the Customer mounts the lever on engines that require the use of
cables other than those mentioned above, a specific kit (optional)
must be used for their installation as indicated below:
KIT K77: C5 and MACH5 cables (Mercury
KIT K78: C36 and MACH36 cables (Mercury
KIT K79: C14 cable (OMC
In this case, do not use the standard kit supplied.
CAUTION
If you use an optional kit, follow the instructions provided with it.
page 6
of 67 -
SINGLE LEVER CONTROL B110-ETC
®
GEN I)
®
GEN II)
®
, EVINRUDE
®
)
Installation and maintenace manual
B110B-ETC
B110W-ETC
B110B/KS -ETC
B110W/KS -ETC
Publicité
