Publicité
SHIFT FORK, SHIFT CAM AND TRANSMISSION
EC4H3000
REMOVAL POINTS
Shift fork, shift cam and transmission
1. Remove:
Shift forks
G
Shift cam
G
Drive axle assembly
G
Main axle assembly
G
NOTE:
Tap lightly on the transmission drive axle and
G
shift cam with a soft hammer to remove.
Remove assembly carefully. Note the posi-
G
tion of each part. Pay particular attention to
the location and direction of shift forks.
ASSEMBLY AND INSTALLATION
Transmission, shift cam shift fork
1. Install:
Main axle assembly 1
G
Drive axle assembly 2
G
2. Install:
Shift fork 1 "L" 1
G
Shift fork 2 "R" 2
G
Shift cam 3
G
Guide bar 4
G
NOTE:
The embossed marks on the shift forks should
face towards the right side of the engine and
be in the following sequence: "R", "L".
3. Check:
Shifter operation
G
Transmission operation
G
Unsmooth operation → Repair.
4 - 46
ENG
Publicité
