Boss GT-001 Mode D'emploi page 8

3
Editing: Basic Operation
Editing on the GT-001 is extremely simple. Please take a moment to learn the basic operations.
1
Choose what you're going to edit
Press one of the following buttons.
EFFECT
Here you can edit the parameters
of each effect.
2
Select an item
The procedure below is an example when you press the
[MENU] button.
1.
Rotate the value knob to move the cursor and
choose an item.
2.
Press the [ENTER] button.
3.
Choose another item with the value knob.
4.
Press the [ENTER] button.
The setting for your selected item is displayed.
3
Edit the values
1.
Change the displayed value with knobs [1]–[4].
2.
Press the [EXIT] button a number of times.
You are returned to the Play screen.
In this manual, the order of operations is written as follows.
Example:
Press the [MENU] button.
Rotate the value knob and choose "SYSTEM, " and then press the [ENTER] button.
Rotate the value knob and choose "AUTO OFF, " and then press the [ENTER] button.
Choose [MENU] " "SYSTEM" " "AUTO OFF."
6
MENU
This lets you access output settings, or
let you set the desired functions for
external pedals.
[ENTER] button Value knob