Other Useful Functions; Using The Metronome - Boss GT-001 Mode D'emploi

8

Other Useful Functions

Using the Metronome

1.
Press the [TUNER] button.
2.
Move the tab with the value knob and choose
"METRONOME."
3.
Make Metronome settings with knobs [1]–[4].
Parameter
[1] TEMPO
[2] BEAT
[3] OFF/ON
[4] LEVEL
4.
Press the [EXIT] button.
You are returned to the Play screen.
* The metronome sound is output from the OUTPUT jacks and the PHONES jack.
* Changing the TEMPO will also change the MASTER BPM. For the detail on MASTER BPM, refer to
"Parameter Guide" (PDF file).
Restoring the factory default settings (Factory Reset)
Restoring the GT-001's system settings (System parameters) to their original factory default settings is
referred to as "Factory Reset. "
Not only can you return all of the settings to the values in effect when the GT-001 was shipped from the
factory, you can also specify the items to be reset.
* When you execute "Factory Reset, " the settings you made will be lost. Save the data you need to your
computer using the dedicated software.
1.
Choose [MENU] " "SYSTEM" " "F. RESET" (FACTORY RESET)
2.
Choose the type of settings to be restored to the factory default settings with knobs [1]
and [4].
Knob Parameter
[1] FROM
[4] TO
3.
Press the [WRITE] button.
If you decide to cancel without executing, press the [EXIT] button.
4.
To execute the Factory Reset, press the [ENTER] button.
Once the Factory Reset is complete, you are returned to the Play screen.
12
Value Explanation
40–250 Specifies the tempo of the metronome.
1/1–8/1,
1/2–8/2,
Selects the time signature.
1/4–8/4,
1/8–8/8
OFF, ON Turns the metronome on/off.
0–100 Adjusts the volume of the metronome.
Value Explanation
SYSTEM System parameter settings
QUICK Settings for User Quick Setting
U001–U200 Settings for Patch Numbers U001−U200
[EXIT] button
[TUNER] button