Functions Of The Training Computer; Assembly - DS Produkte JS-028 Mode D'emploi

EN

Functions of the Training Computer

• The training computer (3) is switched on by moving the foot pedals (5 + 9) back and
forth or pressing the MODE button.
• Press the MODE button several times to switch between the displays.
• When the RESET button is pressed, all data is reset to zero.
• If no action takes place for around 4 minutes, the training computer switches off
automatically.

Assembly

Following these assembly instructions step by step to prevent any errors during set-up
and subsequent use:
18
COUNT The number of moved strides
TIME Training time in minutes and seconds
CAL The rough number of calories used up
STRD/
MIN The possible number of strides per minute
(if you maintain the speed)
SCAN All data is displayed in succession
MODE Menu button for setting the desired
display
RESET Button for resetting the units
1. Unfold the rear part of the frame (8). And fi x it
with the securing button (D).