Publicité
Les langues disponibles
Les langues disponibles
Emergency Battery Backup Strap
For emergency use only, in case of a power outage.
Batteries are not to be used for normal operation of the bed.
1
Disconnect the Power Supply from the input power cord.
Power Supply
2
Connect the Battery Backup Strap to
the (2) Alkaline 9 Volt batteries. Do not
mix brand name Batteries.
18
Control Box
Input Cord
3
Connect the end of the Battery Backup Strap to the input power cord that
is attached to the control box.
Battery Backup Strap
4
Use the remote to return the base to a flat position.
Note: Detach the Battery Backup Strap and reconnect the power supply
after the emergency is over, as the system will continue to draw power
from the batteries even if not in use.
Control Box
Input Cord
Publicité
