Publicité
Les langues disponibles
Les langues disponibles
Remote Control Pairing & Child Lock
Remote Control Pairing
The original remote that comes in the box is already paired to the adjustable
base. No further action is required. In the event that the remote is not paired
with the base, follow the steps below.
1
Unplug the Power Cord from your power outlet. Wait 1 minute, then plug
it back in to your power outlet. Perform Step 2 within 10 seconds, while
the control box light is flashing.
Power Supply
2
Press and hold down the Head Up and Foot Down
buttons simultaneously. The LED light on the
remote will start flashing. When the LED stops
flashing, the illuminated light on the Control
Box will go out. Release the Head Up and Foot
Down buttons. The remote is now paired to the
adjustable base.
3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
Ergomotion customer service: 1-888-550-3746
14
Power Cord
Child Safety Lock
This remote control is programmed with a child lock safety feature. Follow
the instructions below to lock or unlock the remote control.
ACTIVATE CHILD LOCK
Press and hold FLAT and HEAD UP buttons for three (3) seconds. When the
backlight on the remote flashes twice, the lock is completed. If any button is
pressed while under the lock status, the backlight on the remote will flash
twice.
DEACTIVATE CHILD LOCK
Press and hold FLAT and FOOT UP buttons together for three (3) seconds. When
the backlight on the remote flashes twice, the unlock is completed and the
remote will work normally.
Publicité
