Ergomotion quest 4.0 Manuel Du Propriétaire page 15

Remote Control
MOTOR FUNCTIONS
MEMORY PRESETS
TO PROGRAM THE PRESET POSITIONS:
Articulate the head and foot to your desired
position. Next, press and hold one of the preset
buttons [I, II] for 5 seconds. The position is now
saved.
NOTE: To restore the preset buttons back to their
original factory settings, hold FLAT and ZERO-G®
simultaneously for at least 5 seconds. The original
presets will be restored.
The HEAD TILTarrows will adjust
the level of head support.
The LUMBARarrows will adjust the
level of lumbar support.
Preset Position #1
Preset Position #2
MASSAGE FUNCTIONS / LIGHTING
The HEAD MASSAGE button will turn on the head massage.
Cycle through 3 massage intensities.
The FOOT MASSAGE button will turn on the foot massage.
Cycle through 3 massage intensities.
The TIMER/ALL OFF button starts massage at level 2. Select a
10, 20 or 30 minute massage interval. Pressing a fourth time
will turn off massage.
The lights in the centre of the remote indicate a 10, 20 or 30
10 MIN
minute timer setting. Massage will automatically shut off
after 10 minutes if the massage timer isn't set.
The MASSAGE button turns on the head and foot massage.
Press once to activate Underbed Lighting. Press again to turn
off.
13