Tennant VLX 2911SR Manuel D'instructions page 57

6.3. Mounting and changing the brush/abrasive disks (STANDARD MACHINE).
Never work without the brushes and abrasive disks perfectly installed.
These operations must be performed with the machine off and the head raised
The terms RIGHT and LEFT refer to the forward movement of the machine
Mounting the right brush (or abrasive disk)
• remove the right side flap (fig. L, ref. 2);
• position the right brush (fig. M, ref. 1) under the drive disk (fig. M, ref. 2)
• lift the brush and turn it "clockwise" so as to lock it on the drive (fig. M, ref. 3)
• reposition the right side flap;
Mounting the left brush (or abrasive disk)
• Follow the same procedure as used to mount the right brush, blocking it on the drive
disk by turning it anticlockwise.
Removing the right brush (or abrasive disk)
• remove the right side flap (fig. L, ref. 2);
• rotate the brush anticlockwise (fig. M, ref. 1) to release it from the drive disk (fig. M, ref.
3)
• reposition the right side flap;
Removing the left brush (or abrasive disk)
• Follow the same procedure as used to remove the right brush, releasing it from the
drive disk by turning it clockwise.
6.4. Automatic attachment and release of the microfibre disk/brushes/abrasive
disks (MICRO SCRUB / ECS MACHINE)
Never operate the machine without the disks correctly installed.
ATTACHING:
• Raise the side flaps on both sides and position the disks under the housing, making
sure they rest against the stops to align them with the attachment device (fig. N).
• Press the brush button (fig. A, ref. 8) and the machine performs the automatic
attachment manoeuvre
RELEASING:
• Turn off the head and suction motors and all devices.
• Press the release button (fig. A, ref. 16) and hold for five seconds. The machine
performs the automatic release manoeuvre.
6.5. Roller brush assembly and disassembly
Never work without the roller brushes perfectly installed.
These operations must be performed with the machine off and the head raised
Assembly:
• open the right and left side flaps (fig. O, ref. 1) by unscrewing the knobs (fig. O, ref. 2).
ENGLISH
14
 IMPORTANT
! DANGER
 IMPORTANT
 IMPORTANT
! DANGER